N-type connectors serve frequency ranges from 0-11GHz and are used for small to medium power coaxial cable connectors coupled with thread. N connectors are terminated to coaxial cables, PCBs. There are divided into male or female connector, standard polarity or reverse polarity; Typcial impedance 50 ohms. It is with straight body or right angle type; These N-type connectors are terminated in snap-on; soldering or crimping. Typically body is in brass or stainless steel.
|
Frequency: |
DC-11GHz for flex. cable; DC-18GHz for rigid cable |
|
Impedance: |
50 Ohm |
|
VSWR: |
≤1.3 |
|
Dielectric withstanding voltage: |
1500V |
|
Durablity: |
500 times |
|
Body: |
brass or stainless steel |
Product description
Introduction
N-type connectors serve frequency ranges from 0-11GHz for flexible cable or DC-18GHz for rigid cable . It is used for small to medium power coaxial cable connectors coupled with thread. N connectors are terminated to coaxial cables, PCBs. There are divided into male or female connector, standard polarity or reverse polarity; Typcial impedance 50 ohms. It is with straight body or right angle type; These N-type connectors are coupled in snap-on, soldering or crimping method. Typically body is in brass or stainless steel.
Dimension
Plug
Receptacle
Letter
minimum
maximum
minimum
maximum
A
16.0
/
8.53
8.74
B
/
8.38
8.03
8.13
C
3.00
3.15
3.00
3.15
D
1.60
1.68
/
15.93
E
/
21.0
1.19
1.96
F
10.11
10.46
4.37
5.13
G
5.33
5.84
1.19
1.96
H
3.30
4.32
4.75
5.26
I
0.08
/
5.33
/
J
0.41
1.52
9.04
9.19
K
4.5
5
/
/
L
4.01
4.27
/
/
-
Company profile
-
Certificates
